Venue
Shenzhen Office: Floor 15A，No. 111 Taizi Road, Shekou, Nanshan District, Shenzhen, Guangdong, China 518100
-
View details
2720-11
To use boron nitride as an adsorbent, one with a larger specific surface area is required. Q: To use boron nitride as an adsorbent, one with a larger specific surface area is required. What type is more appropriate?A: Type A.
-
View details
2720-11
Can high-temperature hexagonal boron nitride be used in high-speed oxygen gas spraying and plasma coating? Q: Can high-temperature hexagonal boron nitride be used in high-speed oxygen gas spraying and plasma coating?A: Small particle size must be used, recommended 3-5um.
-
View details
2720-11
should high temperature boron nitride be used in gasoline and diesel to reduce friction and enhance lubricity Q: How many microns should high temperature boron nitride be used in gasoline and diesel to reduce friction and enhance lubricity? Is there a general addition ratio?A: For lubrication, large particle size boron...
-
View details
2720-11
When high-temperature boron nitride is used in coatings (release agents) Q: When high-temperature boron nitride is used in coatings (release agents), is it made by adding lubricants and release agents?A: The main components of boron nitride coatings are boron nitride, alumina, water...
-
View details
2720-11
uses boron nitride as thermal grease. Add the powder to dimethyl silicone oil Q: The customer uses boron nitride as thermal grease. Add the powder to dimethyl silicone oil and mix it evenly with a high-speed disperser. The addition ratio of dimethyl silicone oil and boron nitride is less...
-
View details
2720-11
Boron nitride should be used as a filler in epoxy resin to enhance thermal conductivity. Q: Boron nitride should be used as a filler in epoxy resin to enhance thermal conductivity. What type should be used?A: Type C or Type D.
-
View details
2720-11
For diamond products, adding boron nitride to increase the toughness of the finished product Q: For diamond products, adding boron nitride to increase the toughness of the finished product, which type should be used?A: Low temperature boron nitride, 98% content.
-
View details
2720-11
What type of boron nitride is used in suspension? Q: What type of boron nitride is used in suspension?A: Micron-sized boron nitride.
-
View details
2720-11
What is the appearance of hexagonal boron nitride? Q: What is the appearance of hexagonal boron nitride?A: Hexagonal boron nitride has a flaky structure similar to graphite microscopically, and may be spherical and granular as seen by the naked eye.
-
View details
2720-11
Which type of boron nitride is recommended for cosmetics? Q: Which type of boron nitride is recommended for cosmetics?A: Recommended 99%, 0.3-0.4um, the thinner the better, it can be used on lipsticks for lubricating effect.
-
View details
2720-11
Boron nitride is used as a filler for electric heating tubes Q: Boron nitride is used as a filler for electric heating tubes. It is doped in magnesium oxide powder. It needs to be ultra-fine. Which type is recommended? A: Type of boron nitride content 99%, particle size...
-
View details
2720-11
When adding high temperature boron nitride to LED and other electronic devices Q: When adding high temperature boron nitride to LED and other electronic devices, what type should be used?A: LED packaging materials need boron nitride with high crystallinity, and thermal conductive material...
-
View details
2720-11
Which type of boron nitride is used in lubricants? Q: Which type of boron nitride is used in lubricants?A: The particle size is less than 0.5 microns. Boron nitride is insoluble in oil and is generally dispersed in lubricating oil.
-
View details
2720-11
What type should I choose when adding boron nitride to ceramics? Q: What type should I choose when adding boron nitride to ceramics?A: Use low-temperature boron nitride, sintering temperature is 1300 degrees, particle size is about 5 microns.
-
View details
2720-11
What is the sintering temperature of high-temperature boron nitride? Q: What is the sintering temperature of high-temperature boron nitride?A: Between 1300-1800 degrees.
-
View details
2720-11
Will boron nitride react with crosslinking agent and catalyst? Q: Will boron nitride react with crosslinking agent and catalyst?A: Under normal circumstances, it will not react with cross-linking agents and catalysts.
-
View details
2720-11
Boron nitride is used in cosmetics to have a unique silky feel, good skin affinity Q: Boron nitride is used in cosmetics to have a unique silky feel, good skin affinity, and oil absorption. What particle size should be used?A: Type D, about 11 microns.
-
View details
2720-11
What particle size should be used for boron nitride coatings for aluminum products Q: What particle size should be used for boron nitride coatings for aluminum products, with good lubricity?A: Use 18 microns (with calcium) to crush to 8-10 microns.
-
View details
2720-11
What is the production method of 96% and 98% boron nitride and high temperature boron nitride? Q: What is the production method of TANYUN 96 and 98 content boron nitride and high temperature boron nitride?A: 96% and 98% can be achieved by graphite tube method at a temperature of 1050 degrees. High-temper...
-
View details
2720-11
the integration of boron nitride with liquid resin is to cover the surface of the object with a protective film Q: Boron nitride customers require the integration of boron nitride with liquid resin. The purpose is to cover the surface of the object with a protective film, similar to paint. Which particle size range is su...
