Venue
Shenzhen Office: 4305B, Southeast Rongchao Economic and Trade Center, Intersection of Jintian Road and Fuzhong Road, Futian District, Shenzhen Guangdong
-
View details
3020-11
Is boron nitride suitable for GEMA injection system or manual injection system Q: Is boron nitride suitable for GEMA injection system or manual injection system, which is used for aluminum extrusion?A: GEMA injection system or manual injection system can be used, 5 micron type is recommen...
-
View details
3020-11
What is the maximum specific surface area of boron nitride? Q: What is the maximum specific surface area of boron nitride? Oxygen content?A: The specific surface area is 18. The oxygen content is about 0.3.
-
View details
3020-11
What types of boron nitride used as adhesives for steel release agent Q: What types of boron nitride used as adhesives for steel release agent? A: Boron nitride of 10 microns is recommended.
-
View details
3020-11
What types of boron nitride are used as binders for fillers? Q: What types of boron nitride are used as binders for fillers (coated on cans and iron)? A: boron nitride of ?10 microns is recommended.
-
View details
3020-11
What types of boron nitride used as adhesives for electronic bonding? Q: What types of boron nitride used as adhesives for electronic bonding? A: Boron nitride of ?16 microns is recommended for thermal insulation.
-
View details
3020-11
Precautions when using water as a solvent for boron nitride Q: Precautions when using water as a solvent for boron nitrideA: The water temperature should not exceed 60℃, otherwise the boron nitride will decompose. Water mixes with boron nitride, not fusion.
-
View details
3020-11
Can white graphite replace black graphite? Q: Can white graphite replace black graphite?A: Yes, the specific particle size depends on customer process requirements.
-
View details
3020-11
What is the instrument for detecting particle size of boron nitride? Q: What is the instrument for detecting particle size of boron nitride?A: Particle size detector.
-
View details
3020-11
What are the indicators that can be tested for boron nitride? Q: What are the indicators that can be tested for boron nitride?A: Specific surface area, free boron, D50, particle size analysis chart.
-
View details
3020-11
What are the indicators that cannot be tested for boron nitride? Q: What are the indicators that cannot be tested for boron nitride?A: Tap density, thermal conductivity (higher than 1.35, but not tested), carbon content, nitrogen content, agglomeration number, infrared image...
-
View details
3020-11
What is the particle size range of boron nitride suitable for cosmetics? Q: What is the particle size range of boron nitride suitable for cosmetics?A: 13~15um, good crystallinity
-
View details
2720-11
After hexagonal boron nitride is immersed in silica sol Q: After hexagonal boron nitride is immersed in silica sol, can its surface be completely covered by silica sol?A: No.
-
View details
2720-11
How much high temperature can boron oxide withstand? Q: How much high temperature can boron oxide withstand?A: 800 degrees.
-
View details
2720-11
What is the limit oxidation temperature of boron nitride? How to strengthen the oxidation resistance Q: What is the limit oxidation temperature of boron nitride? How to strengthen the oxidation resistance when the process temperature exceeds the limit temperature?A: The limit oxidation temperature of boron nit...
-
View details
2720-11
What is the proportion of boron nitride added to the lubricant? Q: What is the proportion of boron nitride added to the lubricant?A: Around 17%.
-
View details
2720-11
Can boron nitride be filled with resin products? Q: Can boron nitride be filled with resin products? If possible, do you need to do special treatment?A: Yes.
-
View details
2720-11
5 micron high-temperature boron nitride to be dissolved in the glue (to improve thermal conductivity) Q: The customer used 3 micron and 5 micron high-temperature boron nitride to be dissolved in the glue (to improve thermal conductivity), but a small amount of boron nitride was not dispersed. The customer would...
-
View details
2720-11
Can high temperature boron nitride be sprayed with an electrostatic spray gun? Q: Can high temperature boron nitride be sprayed with an electrostatic spray gun?A: Yes.
-
View details
2720-11
To add high-temperature boron nitride to the release agent Q: To add high-temperature boron nitride to the release agent, the main materials for the heat insulation material are calcium silicate and liquid aluminum. What kind of solvent should be added to make high-tem...
-
View details
2720-11
Can high temperature boron nitride be made into molds? Q: Can high temperature boron nitride be made into molds?A: The mold is made of graphite material. Our high-temperature boron nitride can also be heated under 1800 degrees Celsius to form.
